Bradbury Scissor Lifts

 Bradbury H8101 Portable Scissors Lift

back to top 

Low Lifting Height - Short Platform

• Technical Data

• 2500kgs Lifting Capacity

• Actual Weight 480 kgs

• Lifting time 12secs

• Lowering time 35 seconds

• Minimum Height fully lowered 95mm

• Maximum Lifting height 930 mm

• Platform Length 1400 to 1932 mm

• Overall width 1770 mm

• Power supply 3kw motor 400V 50Hz

• Single Phase Version available.

• Concrete strength 35N/mm2 160mm thick

• Continuous slab without cracks or joins

• Options include wheel kit to make portable

• 12 months manufacturers warranty

This PORTABLE Mid rise scissors lift is ideal for the busy tyre shop or body shop. It is very strong in construction and incorporates both mechanical & hydralic safety devices. All pins and bushes are self lubricating. The power pack is portable, extremely quiet and is fitted with an accoustic alarm during lifting & descending operations. The benefit of these small lifts allow full access to sides, front and rear of the vehicle.

 View detailed catalogue

 Bradbury H8903 Surface mounted low profile Scissor

back to top 

Full Height - Short Platform Adjustable

• Technical Data

• 3200kgs Lifting Capacity

• Fast Lifting & Lowering time 45secs

• Minimum Height fully lowered 98mm

• Maximum Lifting height 2000mm

• Platform Length 1460 to 2020mm

• Overall width 1870mm

• Power supply 3kw motor 400V 50Hz 3 phase

• Single Phase Version available.

• Concrete strength 35N/mm2 160mm thick

• Continuous slab without cracks or joins

• Options include hose extension kit

• 12 months manufacturers warranty

This SURFACE MOUNTED full height scissors lift is ideal for tyre shops, body shops and all workshops. It is very strong in construction and incorporates mechanical & hydralic safety devices. All pins and bushes are self lubricating. The platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during
descenT. The benefit of this lift is its very low closed height which allows low vehicles fitted with spoilers easy drive on access. In addition this lift does not need to be recessed into the floor.

 View detailed catalogue

 Bradbury H8603 recessed in floor Scissors Lift

back to top 

Full Height - Adjustable Short Platform

• Technical Data

• 3600kgs Lifting Capacity

• Fast Lifting & Lowering time

• Minimum Height fully lowered 120mm

• Maximum Lifting height 1850 mm

• Platform Length 1500 to 1900 mm

• Overall width 1900 mm

• Power supply 3kw motor 400V 50Hz 3 phase

• Single Phase Version available.

• Concrete strength 35N/mm2 160mm thick

• Continuous slab without cracks or joins

• Options include hose extension kit

• 12 months manufacturers warranty

This RECESSED IN FLOOR full height scissors lift is ideal for tyre shops, body shops and all workshops. It is very strong in construction and incorporates mechanical & hydralic safety devices. All pins and bushes are self lubricating. The platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during lifting & descending operations. The benefit of scissor lifts allow full access to sides, front and rear of the vehicle.

 View detailed catalogue

 Bradbury H8303 Wheel Alignment Lift

back to top 

Long Platform Scissor in Platform Lift

• Technical Data

• Lifting Capacity 4500 kgs

• Overall Platform length 5500mm

• Lift & Lowering time 50 secs

• Maximum Lifting height 2140mm

• Maximum closed height 330mm

• Dimensions of Built In platform

• Overall platform length 1500 to 1940mm

• Overall height of lifting table 565mm

• Motor 3 kw 230/400V/50 Hz-3ph

• Air Supply required 6-8 bar

• Concrete 35N/mm2 strength 160 mm thick

• Continuous slab without cracks or joins

• Options available include

• Jacking Beam Air or Hydraulic

• Wheelplay Detectors

• Extra Long run up ramps

• 12 Months Manufacturers Warranty

This SURFACE MOUNTED full height scissors lift is ideal for tyre shops, body shops and all workshops. It is also the model to choose if you carry out wheel alignment. The main platform has another smaller length platform fitted inside allowing vehicles to be fully lifted quickly to make facilitate quick adjustments. Heavy Duty in construction incorporating mechanical & hydralic safety devices. All pins and bushes are self lubricating. The small hidden platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during
descenT. The benefit of this lift is its diversity servicing, wheel alignment and all other operations are carried out simply and safely. This lift can be recessed into the floor if required.

 View detailed catalogue

 Bradbury H8203/ATL MOT Scissor Lift 5000mm long

back to top 

Long Platform, full height VOSA approved

• Technical Data

• Lifting Capacity 5000kgs

• Overall Platform length 5000mm

• Lift & Lowering time 50 secs

• Maximum Lifting height 2140mm

• Maximum closed height 330mm

• Motor 3 kw 230/400V/50 Hz-3ph

• Air Supply required 6-8 bar

• Concrete 35N/mm2 strength 160 mm thick

• Continuous slab without cracks or joins

• Options available include

• Jacking Beam Air or Hydraulic

• Wheelplay Detectors

• Roller Bearing Turning Trays

• 12 Months Manufacturers Warranty

This lift can be RECESSED or SURFACE MOUNTED to suit your MOT Bay. When ordered in MOT Specification it will include ball bearing turning trays, Wheelplay Detectors with handlamp and brake pedal depressor. If used in a workshop situation it can be bought without these items and as a standard flat platform. Heavy Duty in construction incorporating mechanical & hydralic safety devices. All pins and bushes are self lubricating.
This lift is extremely quiet and is fitted with an accoustic alarm during descent.

 View detailed catalogue