Bradbury Two Post Lifts

 Bradbury Lift M2903CD Electro-Mechanical Two Post

back to top 

Low Pad Height - Full Base - Shaft Drive

• Lifting Capacity 3000kgs

• Chain Drive

• Asymmetric design Long rear arms short front arms

• Lowest pick up point 90mm

• Lifting height 1950mm

• Width between post 2460mm

• Automatic Arm Locking during lifting

• Automatic permanent nut lubrication system

• Lifting Lowering time 55 seconds

• Available in single or three phase

• 12 months manufacturers warranty

A very popular lift due to the fact it is mounted on a base allowing the floor specification to be less critical. Low pad height for ease of use, Low ceiling requirement means it will fit in most workshops & service bays. Asymmetric design allows easy access to vehicle. Automatic safety cut out and low voltage controls.
Shaft drive, Proven electro-mechanical screw and nut operation. Automatic nut lubrication system. Automatic arm locking and anti-toe trapping facility, a good all round everyday lift.

 View detailed catalogue

 Bradbury Lift M2703 Electro-Mechanical two post

back to top 

Low Pad Height - Full base - Chain Drive

• Available in Three phase only

• Operation Electro-mechanical

• Lifting Capacity 3200kg

• Full Metal supporting base

• Lifting & Lowering Time 44 seconds

• Maximum Lifting height 2240mm

• Distance between posts 2380mm

• Maximum lowered height 105mm

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

This lift was constructed for the busiest of workshops it is sturdy and dependable and has low operation and maintenance costs. It is reliable and easy to operate and is adapted to the mechanics requirements including Very low minimum height and self locking arms. Installation at your premises is quick and easy.

 View detailed catalogue

 Bradbury Lift M2703 Electro-mechanical Extra Wide

back to top 

Two Post Lift - Full base - Chain Drive

• Available in Three phase only

• Operation Electro-mechanical

• Lifting Capacity 3200kg

• Full Metal supporting base

• Lifting & Lowering Time 55 seconds

• Maximum Lifting height 2050mm

• Distance between posts 2635mm

• Maximum lowered height 100mm

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

This lift is exactly the same as Bradbury model M2703 above.
The only real difference is that the gap between the posts is wider 2635mm
Pad Extensions Available 60mm, 100mm & 170mm

 View detailed catalogue

 Bradbury Lift M2933 Electro-mechanical two post

back to top 

3200kgs Baseless - Twin Motor version

• Available in Three phase only

• Operation Electro-mechanical

• Lifting Capacity 3200kg

• No supporting base, overhead gantry

• Lifting & Lowering Time 50 seconds

• Maximum Lifting height 2155mm

• Distance between posts 2635mm

• Maximum lowered height 95mm

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

This lift was constructed for the busiest of workshops it is sturdy and dependable and has low operation and maintenance costs. It is reliable and easy to operate and is very popular with the Franchise Dealers because it is totally baseless.
Baseless allows toolboxes and Oil Drainers etc to be pushed between the posts with the greatest of ease. In addition the very low arms 95mm make it very diverse with the complete vehicle range. Installation at your premises is quick and easy.

 View detailed catalogue

 Bradbury Lift 2533 Electro-mechanical two post

back to top 

5000kgs Baseless - Twin Motor version

• Available in Three phase only

• Operation Electro-mechanical

• Lifting Capacity 5000kgs

• No supporting base, overhead gantry

• Lifting & Lowering Time 55 seconds

• Maximum Lifting height 2065mm

• Distance between posts 3185mm

• Maximum lowered height 135mm

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

This lift is ideal for the repairer of large vans. All four Arms are symmetrical and are fully extendable to 1960mm each giving a full reach nearing 4 metres.
The length of arm makes it diverse enough to lift small cars as well.
Superb all round lift for all makes and models.
Additional Lifting extensions available.

 View detailed catalogue

 Bradbury Lift 2893 Electro-hydraulic two post

back to top 

Single & Three Phase models available.

• Lifting Capacity 3000kgs

• Single Hydraulic Piston operation

• Chain Drive

• Asymmetric design Long rear arms short front arms

• Lowest pick up point 100mm

• Lifting height 1920mm

• Width between post 2500mm

• Automatic Arm Locking during lifting

• Lifting Lowering time 45 seconds

• Available in single or three phase

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

Enjoy the best of both worlds with this lift.
Electro-Hydraulic, steel one piece base for poor floors and dual ram piston for low ceiling heights.
Optional Pad extensions 60mm 100mm 170mm

 View detailed catalogue

 Bradbury Lift 2203 Electro-hydraulic two post

back to top 

Single & Three Phase models available.

• Lifting Capacity 3200kgs

• Electro-hydraulic in operation

• No supporting base, overhead gantry

• Lifting & Lowering Time 45 seconds

• Maximum Lifting height 1920mm

• Distance between posts 2605mm

• Maximum lowered height 95mm

• Concrete floor to be 160 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

This lift is ideal for the operator who wants a hydraulic lift with no steel base.
It is very easy to use and is a popular model with the franchised garages allowing toolbox and oil drainer movement through the lift without a base to bump over.
A good quality product.

 View detailed catalogue

 Bradbury Lift 2433 Electro-hydraulic two post

back to top 

Single & Three Phase models available.

• Lifting Capacity 4000kgs

• Electro-hydraulic in operation

• No supporting base, overhead gantry

• Extra High version available

• Lifting & Lowering Time 35 seconds

• Maximum Lifting height 1935mm

• Distance between posts 2756mm

• Maximum lowered height 100mm

• Concrete floor to be 200 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

Very similar to the model 2203 but with heavier lifting capacity.
This lift is ideal for the operator who wants a hydraulic lift with no steel base.
It is very easy to use and is a popular model with the franchised garages allowing toolbox and oil drainer movement through the lift without a base to bump over.
Also availabe with extra high gantry for high sided vans etc.
Pad Extensions Available 60mm, 100mm & 170mm

 View detailed catalogue

 Bradbury Lift 2533 Electro-hydraulic two post

back to top 

Single & Three Phase models available.

• Lifting Capacity 5000kgs

• Electro-hydraulic in operation

• No supporting base, overhead gantry

• Extra High version available

• Lifting & Lowering Time 35 seconds

• Maximum Lifting height 1935mm

• Distance between posts 2956mm

• Maximum lowered height 100mm

• Concrete floor to be 250 mm minimum thickness continuous slab without cracks or joins

• 12 months manufacturers warranty

Very similar to the model 2433 but with heavier lifting capacity.
This lift is ideal for the operator who wants a hydraulic lift with no steel base.
It is very easy to use and is a popular model with the franchised garages allowing toolbox and oil drainer movement through the lift without a base to bump over.
Also availabe with extra high gantry for high sided vans etc.
Pad Extensions Available 60mm, 100mm & 170mm

 View detailed catalogue