Ravaglioli Commercial Lifts      

 Ravaglioli Model 709 Scissor Lift

back to top 

9000kgs Capacity Scissor Lift

• 9000kgs lifting capacity

• 6000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• Wheel Alignment & Wheelplay Detectors

The best solution for a busy commercial workshop is the RAV range of scissor lifts. Lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements. The platform length and capacity of this lift makes it ideal for big vans and trucks with a full weight not exceeding 9000kgs.

 View detailed catalogue

 Ravaglioli Model 713 Scissor Lift

back to top 

13000kgs Capacity Scissor Lift

• 13000kgs lifting capacity

• 7000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• Wheel Alignment & Wheelplay Detectors

The best solution for a busy commercial workshop is the RAV range of scissor lifts. Lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements. The platform length and capacity of this lift makes it ideal for buses and trucks.

 View detailed catalogue

 Ravaglioli Model 718 Scissor Lift

back to top 

18000kgs Capacity Scissor Lift

• 18000kgs lifting capacity

• 8000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• wheel Alignment & Wheelplay Detectors

The best solution for a busy commercial workshop is the RAV range of scissor lifts. Lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements.The platform length and capacity of this lift makes it ideal for buses and trucks.

 View detailed catalogue

 Ravaglioli Model 725N Scissor Lift

back to top 

22500kgs Capacity Scissor Lift

• 22500kgs lifting capacity

• 8000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• wheel Alignment & Wheelplay Detectors

The best solution for a busy commercial workshop is the RAV range of scissor lifts. Lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements.The platform length and capacity of this lift makes it ideal for buses and trucks.

 View detailed catalogue

 Ravaglioli Model 733 Scissor Lift

back to top 

33000kgs Capacity Scissor Lift

• 33000kgs lifting capacity

• 9000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• wheel Alignment & Wheelplay Detectors

This is the big lift, because of its capacity and platform length it tends to be used to lift specialist heavy types of transport. Tankers, Trucks with Cranes, Fire Brigade Vehicles & Airport Tractors. The best solution for a busy commercial workshop is the RAV range of scissor lifts. Lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements.

 View detailed catalogue

 Ravaglioli Model 745 Scissor Lift

back to top 

45000kgs Capacity Scissor Lift

• 45000kgs lifting capacity

• 13000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• Wheel Alignment & Wheelplay Detectors

The standard model 45000kgs, 13000mm platform is ideal for the operator who wants to lift truck and trailer. The extra large capacity allows for these vehicles to be lifted when fully loaded. The best solution for a busy commercial workshop, lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements.

 View detailed catalogue

 Ravaglioli Model 745 (Heavy Duty)

back to top 

45000kgs Capacity Scissor Lift

• 45000kgs lifting capacity (Heavy Duty)

• 9000mm platform length

• No cross rails or torsion bars

• Maximum accessability in the working area

• Platform Surface is ribbed anti-slip plate

• Audible alarm during lowering phase

• Options available

• Lighting kits

• Jacking Beams

• Wheel Alignment & Wheelplay Detectors

The HD model (Heavy Duty) was concieved for particularly Heavy and Difficult loads. It is ideal for vehicles with axles close to each other. The best solution for a busy commercial workshop, lots of space when lifted and obstacle free, floor space when lowered. High quality design with hydraulic synchronisation of platforms and audible alarm during lowering. The range of platforms and lifting capacities is massive so theres bound to be one for your workshop requirements.

 View detailed catalogue

 Ravaglioli Model KP174 Four Post Lift

back to top 

6000kgs Fork Lift Truck Lift

• 6000kgs lifting capacity

• 3325mm platform length

• 550mm platform width

• Overall length including run-up ramps 4420mm

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Lighting kits

This Ravaglioli Lift is designed and manufactured for the operator who repairs or maintains Fork Lift trucks. It is short in length and incredibly strong, it is ideal for the job it was intended and will give years of service.

 View detailed catalogue

 Ravaglioli Model KP174E Four Post Lift

back to top 

10000kgs Fork Lift Truck Lift

• 10000kgs lifting capacity

• 3740mm platform length

• 700mm platform width

• Overall length including run-up ramps 5980mm

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Lighting kits

This Ravaglioli Lift is designed and manufactured for the operator who repairs or maintains Fork Lift trucks, including the larger and heavier models. It is slighty longer than the KP175 thus more diverse. Still incredibly strong, it is ideal for the job it was intended and will give years of service.

 View detailed catalogue

 Ravaglioli Model KP442E Four Post Lift

back to top 

Electro-Mechanical Four Post lift

• Ideal for truck or coach operator

• 12000kgs lifting capacity

• 8000mm platform length

• 700mm platform width

• Automatic Lubrication system to screws by oil bath

• CE approved lift with low voltage controls

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Hydraulic Jacking Beams

• Lighting kits

These lifts are built to be reliable and last forever. A good, reliable proven design ensures level platforms regardless of vehicle position during lifting. The motors are inter-connected mechanically by line shafting and bevel gear boxes in oil bath. Only one adjustment is made during the installation, never during operation as there are no parts subject to yielding or lengthening such as cables and load bearing chains. Automatic lubrication of main and safety nuts and spindles is achieved by a plunger pump, one in each column, which ensures positive lubrication every time the lift is raised thus ensuring long life and smooth running

 View detailed catalogue

 Ravaglioli Model KP442NE Four Post Lift

back to top 

Electro-Mechanical Four Post lift

• Ideal lift for truck or coach operator

• 14000kgs lifting capacity

• 8000mm platform length

• 700mm platform width

• Automatic Lubrication system to screws by oil bath

• CE approved lift with low voltage controls

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Hydraulic Jacking Beams

• Lighting kits

This lift is exactly the same as the Model KP442E above, but has the larger lifting capacity of 14000kgs. Look at your fleets various wheelbases to determine your model.

 View detailed catalogue

 Ravaglioli Model KP440E Four Post Lift

back to top 

Electro-Mechanical Four Post lift

• Ideal lift for truck or coach operator

• 20000kgs lifting capacity

• 8000mm platform length

• 700mm platform width

• Automatic Lubrication system to screws by oil bath

• CE approved lift with low voltage controls

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Hydraulic Jacking Beams

• Lighting kits

These lifts are built to be reliable and last forever. A good, reliable proven design ensures level platforms regardless of vehicle position during lifting. The motors are inter-connected mechanically by line shafting and bevel gear boxes in oil bath. Only one adjustment is made during the installation, never during operation as there are no parts subject to yielding or lengthening such as cables and load bearing chains. Automatic lubrication of main and safety nuts and spindles is achieved by a plunger pump, one in each column, which ensures positive lubrication every time the lift is raised thus ensuring long life and smooth running

 View detailed catalogue

 Ravaglioli Model KP440NE Four Post Lift

back to top 

Electro-Mechanical Four Post lift

• Ideal lift for truck or coach operator

• 24000kgs lifting capacity

• 8000mm platform length

• 700mm platform width

• Automatic Lubrication system to screws by oil bath

• CE approved lift with low voltage controls

• Audible alarm during lowering phase

• Three phase supply as standard

• Options available

• Hydraulic Jacking Beams

• Lighting kits

This lift is exactly the same as the Model KP440E above, but has the larger lifting capacity of 24000kgs. Look at your fleets various wheelbases to determine your model

 View detailed catalogue

 Ravaglioli Model KP440 range DUO LIFT

back to top 

Synchronised Version - VARKP440E/DUO

• The Ravaglioli KP440 range can be twinned

• Operated as one or as a pair

• The best of both worlds

• Ideal for your long vehicles Operated together

• Ideal for two vehicles Operated seperately

• Options available

• Lighting kits

• Jacking Beams

• Wheel Alignment & Wheelplay Detectors

This combination of lift is ideal for the single bay workshop offering the ability to service long vehicle or two short vehicles at the same time. The lifts can be used as one or independently.

 View detailed catalogue

 Ravaglioli Model KP440 Accessory

back to top 

KP118 & 118P 13500kgs Jacking Beam

• Designed for KP442E, 442NE, 440E & 440NE

• Lifting Capacity 13500kgs

• Available in Hydraulic or Air Hydraulic

• Lifting Height from 156mm closed to to 302mm open

• Selection of varying Height Adaptors

This Ravaglioli Jacking beam has the features and accessories to satisfy all user requirements. An ideal addition to the lift to achieve the wheel-free condition so often needed, for instance to control vehicle wheel alignment. All models are designed and built in conformity with applicable safety standards.

 Ravaglioli Model 210 Mobile Column Lifts

back to top 

Electro Mechanical 3000kgs per column

• 12000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Entry level mobile column lifts, ideal for the customer who runs a fleet of vans or smaller trucks & coaches. Anything up to 12000kgs can be lifted easily.
The screws on the Ravaglioli 210 lifts are automatically lubricated by felt pads supplied by integral oil reservoir and lubrication is guaranteed during movement. A series of runners (10 per carriage), manufactured in Ertalon with low friction coefficient and excellent resistance to wear, guarantee balanced lifting of the vehicle in any position.

 View detailed catalogue

 Ravaglioli Model 220 Mobile Column Lifts

back to top 

Electro Mechanical 4000kgs per column

• 16000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Same specification as the Model 210 above but larger lifting capacity. Entry level mobile column lifts, ideal for the customer who runs a fleet of vans or smaller trucks & coaches. Anything up to 16000kgs can be lifted easily.
The screws on the Ravaglioli 220 lifts are automatically lubricated by felt pads supplied by integral oil reservoir and lubrication is guaranteed during movement. A series of runners (10 per carriage), manufactured in Ertalon with low friction coefficient and excellent resistance to wear, guarantee balanced lifting of the vehicle in any position.

 View detailed catalogue

 Ravaglioli Model 230 Mobile Column Lifts

back to top 

Electro Mechanical 5500kgs per column

• 22000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Same specification as the Model 220 above but larger lifting capacity. Professional mobile column lifts, ideal for the customer who runs any vehicles, vans or small trucks, big trucks & coaches. Anything up to 22000kgs can be lifted easily.
The screws on the Ravaglioli 230 lifts are automatically lubricated by felt pads supplied by integral oil reservoir and lubrication is guaranteed during movement. A series of runners (10 per carriage), manufactured in Ertalon with low friction coefficient and excellent resistance to wear, guarantee balanced lifting of the vehicle in any position.

 View detailed catalogue

 Ravaglioli Model 240 Mobile Column Lifts

back to top 

Electro Mechanical 6500kgs per column

• 26000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Same specification as the Model 230 above but larger lifting capacity. Professional mobile column lifts, ideal for the customer who runs any vehicles, vans or small trucks, big trucks & coaches. Anything up to 26000kgs can be lifted easily.
The screws on the Ravaglioli 240 lifts are automatically lubricated by felt pads supplied by integral oil reservoir and lubrication is guaranteed during movement. A series of runners (10 per carriage), manufactured in Ertalon with low friction coefficient and excellent resistance to wear, guarantee balanced lifting of the vehicle in any position.

 View detailed catalogue

 Ravaglioli Model 260 Mobile Column Lifts

back to top 

Electro Mechanical 8500kgs per column

• 34000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Same specification as the Model 240 above but larger lifting capacity. Professional mobile column lifts, ideal for the customer who runs any vehicles, vans or small trucks, big trucks & coaches. Anything up to 34000kgs can be lifted easily.
The Ravaglioli 260 model column lifts are manufactured in boxed sheet steel with sliding profiles of rollers in high resistance steel. Steel rollers for carriage movement fitted on self-lubrificating bearings requiring no maintenance. Direct drive to the spindle by means of a self-braking motor-gear unit. Automatic lubrication by means of oil pump of the spindle and nuts.

 View detailed catalogue

 Ravaglioli Model 270 Mobile Column Lifts

back to top 

Electro Mechanical 10000kgs per column

• 40000kgs capacity - Per Set of 4 Columns

• N & NL Versions are upgradeable to 6 or 8 columns

• Electro Mechanical in design

• Lifting Height 1800mm

• Indoor and outdoor versions are available

• 12 Months Warranty

• 3 Phase (400v) Power Requirement

• OPTIONS AT EXTRA COST

• Small Wheel Adaptors

• High Level Axle Support Stands

• Cross Member Support Beam

Same specification as the Model 260 above but larger lifting capacity. Professional mobile column lifts, ideal for the customer who runs any vehicles, vans or small trucks, big trucks & coaches. Anything up to 40000kgs can be lifted easily.
The Ravaglioli 270 model column lifts are manufactured in boxed sheet steel with sliding profiles of rollers in high resistance steel. Steel rollers for carriage movement fitted on self-lubrificating bearings requiring no maintenance. Direct drive to the spindle by means of a self-braking motor-gear unit. Automatic lubrication by means of oil pump of the spindle and nuts.

 View detailed catalogue