Scissor Lifts - All Manufacturers

Below is a selection of the most popular scissor lifts we supply. Of course we can source different products, if these do not match your needs. So If you don't see what you want here, please contact us and we'll do our best to help.

(Click on the images to view them at their largest available size)

 Ravaglioli 505IF - recessed in floor Scissors Lift

back to top 
Ravaglioli 505IF - recessed in floor Scissors Lift

Short Platform - Full Height model

  • 2500kgs Lifting Capacity

  • Air Locking Safety Mechanism

  • Lifting Height 1825mm

  • Recessed Installation level with floor

  • 12 Months Warranty

  • 3 phase power supply required

  • Note

  • This Lift requires a Compressed Air Supply

  • OPTIONS AT EXTRA COST

  • Single Phase version

This electro-hydraulic lift is ideal for the tight workshop where it is not possible to fit a standard two post lift model. The car is always parked over the lifts platforms and there are no posts to worry about. The control box can be mounted left or right of the vehicle, frontwards or backwards. Download the full brochure for specification.

 View detailed catalogue

 Ravaglioli 506IF - recessed in floor Scissors Lift

back to top 
Ravaglioli 506IF - recessed in floor Scissors Lift

Short Platform - Full Height model

  • 3500kgs Lifting Capacity

  • OPTIONS AT EXTRA COST

  • Single Phase version

  • 12 months manufacturers warranty

This electro-hydraulic lift has all the features as the 505IF & 507IF Models above, but has the capacity to lift 3500kgs.

 View detailed catalogue

 Ravaglioli 507IF - recessed in floor Scissors Lift

back to top 
Ravaglioli 507IF - recessed in floor Scissors Lift

Short Platform - Full Height model

  • 3000kgs Lifting Capacity

  • OPTIONS AT EXTRA COST

  • Single Phase version

  • 12 months manufacturers warranty

This electro-hydraulic lift has all the features as the 505IF Model above, but has the capacity to lift 3000kgs.

 View detailed catalogue

 Ravaglioli 506 I - recessed in floor Scissor Lift

back to top 
Ravaglioli 506 I - recessed in floor Scissor Lift

Short Platform - Full Height model

  • 2500kgs Lifting Capacity

  • Extendable Platform length from 1320mm to 1730mm

  • Air Locking Safety Mechanism

  • Lifting Height 1825mm

  • Recessed Installation level with floor

  • 12 Months Warranty

  • 3 phase power supply required

  • Note

  • This Lift requires a Compressed Air Supply

  • OPTIONS AT EXTRA COST

  • Single Phase version

This electro-hydraulic lift is ideal for the tight workshop where it is not possible to fit a standard two post lift model. The car is always parked over the lifts platforms and there are no posts to worry about. The control box can be mounted left or right of the vehicle, frontwards or backwards. Download the full brochure for specification.

 View detailed catalogue

 Ravaglioli 508i/Mi recessed in floor Scissors Lift

back to top 
Ravaglioli 508i/Mi recessed in floor Scissors Lift

Short adjustable Platform - Full Height

  • 3000kgs Lifting Capacity

  • Extendable Platform length from 1320mm-1730mm

  • 508Mi version has 1490-1900mm platforms

  • OPTIONS AT EXTRA COST

  • Single Phase version

  • Additional height rubber blocks

  • Includes fitting and 12 months manufacturers warranty

This electro-hydraulic lift has all the features as the 506i Model above, but has the capacity to lift 3000kgs.

 View detailed catalogue

 Ravaglioli 516 NL - Surface Mounted Scissor Lift

back to top 
Ravaglioli 516 NL - Surface Mounted Scissor Lift

Short Platform - Full Height

  • 2500kgs Lifting Capacity

  • Surface mounted direct onto workshop floor

  • Height of platform when fully lowered 110mm

  • Air Locking Safety Mechanism

  • Lifting Height 1825mm

  • Recessed Installation

  • 12 Months Warranty

  • 3 phase power supply required

  • Note

  • This Lift requires a Compressed Air Supply

  • OPTIONS AT EXTRA COST

  • Single Phase version

This electro-hydraulic lift is ideal for the tight workshop where it is not possible to fit a standard two post lift model. No building works are required whatsoever, so the installation time is cut to the minimum. The car is always parked over the lifts platforms and there are no posts to worry about. The control box can be mounted left or right of the vehicle, frontwards or backwards. Download the full brochure for specification.

 View detailed catalogue

 Ravaglioli 518 NL - Surface Mounted Scissor Lift

back to top 
Ravaglioli 518 NL - Surface Mounted Scissor Lift

Short Platform, Full Height, Low profile

  • 3000kgs Lifting Capacity

  • Surface mounted direct onto workshop floor

  • Height of platform when fully lowered 110m

  • 12 months manufacturers warrantym

  • OPTIONS AT EXTRA COST

  • Single Phase version

This electro-hydraulic lift has all the features as the 516 NL Model above, but has the capacity to lift 3000kgs

 View detailed catalogue

 Ravaglioli 518T / 520 Surface Mounted Scissor Lift

back to top 
Ravaglioli 518T / 520 Surface Mounted Scissor Lift

Short Platform, Full Height, Low profile

  • 3000kgs Lifting Capacity

  • Surface mounted direct onto workshop floor

  • Height of platform when fully lowered 95mm

  • OPTIONS AT EXTRA COST

  • Single Phase version

  • 12 months manufacturers warranty

This electro-hydraulic lift has all the features as the 516NL & 518NL Models above, but when the lift is lowered its height is only 95mm allowing the lowest of cars, or cars with damaged supension to be put over the lift. Lifting Capacity 3000kgs.

 View detailed catalogue

 Dunlop DSL3 Low Profile Hydraulic Scissors Lift

back to top 
Dunlop DSL3 Low Profile Hydraulic Scissors Lift

Full Height - Short Platform model

  • 3000kgs lifting capacity

  • Twin hydraulic cylinders on each side

  • Pneumatic safety locks & hydraulic safety circuit

  • CE Approved

  • Minimum Platform height closed 110mm

  • Maximum Lifting height 1840mm

  • Choice of single or three phase supply

  • 16 amp isolator required (for singte phase)

  • Available in flush fitted or surface mounted models

  • 12 months manufacturers warranty

This electro-hydraulic lift is ideal for the workshop where there is no space to fit a two post lift. The car is always parked over the lifts platforms and there are no posts to worry about. The control box is mounted to the right of the vehicle.
Download the full brochure for specification.

 Dunlop DLSRM 1/3 Hydraulic Scissors Lift models

back to top 
Dunlop DLSRM 1/3 Hydraulic Scissors Lift models

Full Height - Short Platform Adjustable

  • 3200 kgs maximum lifting capacity

  • Lifting time 35 seconds

  • Lowering time 40 seconds

  • Maximum Lifting height 2OOOmm

  • Minimum closed height 98mm

  • Available in 1ph or 3ph

  • 12 months manufacturers warranty

This extra low profile scissors lift is easy to drive on and drive off. The platforms are adjustable in length for short sportscars or long saloons like the Mercedes S Class.
includes four rubber mounting pads and descent buzzer warning in main control console. Ideal for all workshops and tyre bays.

 Dunlop DTSL3 Hydraulic Scissors Lift

back to top 
Dunlop DTSL3 Hydraulic Scissors Lift

Low Lifting Height - Short Platform

  • 3000kgs lifting capacity

  • Twin hydraulic cylinders on each side

  • Pneumatic safety locks & hydraulic safety circuit

  • CE Approved

  • Minimum Platform height closed 110mm

  • Maximum Lifting height 1000mm

  • Choice of single or three phase supply

  • 16 amp isolator required (for singte phase)

  • Available in flush fitted or surface mounted models

  • 12 months manufacturers warranty

The Low Height Scissor Lift from Dunlop is ideal for the busy tyre shop or bodyshop.
Its maximum height of 1000mm gives easy access to removal of wheels and body panels if required. A superb assett to any workshop.

 Bradbury H8101 Portable Scissors Lift

back to top 
Bradbury H8101 Portable Scissors Lift

Low Lifting Height - Short Platform

  • Technical Data

  • 2500kgs Lifting Capacity

  • Actual Weight 480 kgs

  • Lifting time 12secs

  • Lowering time 35 seconds

  • Minimum Height fully lowered 95mm

  • Maximum Lifting height 930 mm

  • Platform Length 1400 to 1932 mm

  • Overall width 1770 mm

  • Power supply 3kw motor 400V 50Hz

  • Single Phase Version available.

  • Concrete strength 35N/mm2 160mm thick

  • Continuous slab without cracks or joins

  • Options include wheel kit to make portable

  • 12 months manufacturers warranty

This PORTABLE Mid rise scissors lift is ideal for the busy tyre shop or body shop. It is very strong in construction and incorporates both mechanical & hydralic safety devices. All pins and bushes are self lubricating. The power pack is portable, extremely quiet and is fitted with an accoustic alarm during lifting & descending operations. The benefit of these small lifts allow full access to sides, front and rear of the vehicle.

 View detailed catalogue

 Bradbury H8903 Surface mounted low profile Scissor

back to top 
Bradbury H8903 Surface mounted low profile Scissor

Full Height - Short Platform Adjustable

  • Technical Data

  • 3200kgs Lifting Capacity

  • Fast Lifting & Lowering time 45secs

  • Minimum Height fully lowered 98mm

  • Maximum Lifting height 2000mm

  • Platform Length 1460 to 2020mm

  • Overall width 1870mm

  • Power supply 3kw motor 400V 50Hz 3 phase

  • Single Phase Version available.

  • Concrete strength 35N/mm2 160mm thick

  • Continuous slab without cracks or joins

  • Options include hose extension kit

  • 12 months manufacturers warranty

This SURFACE MOUNTED full height scissors lift is ideal for tyre shops, body shops and all workshops. It is very strong in construction and incorporates mechanical & hydralic safety devices. All pins and bushes are self lubricating. The platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during
descenT. The benefit of this lift is its very low closed height which allows low vehicles fitted with spoilers easy drive on access. In addition this lift does not need to be recessed into the floor.

 View detailed catalogue

 Bradbury H8603 recessed in floor Scissors Lift

back to top 
Bradbury H8603 recessed in floor Scissors Lift

Full Height - Adjustable Short Platform

  • Technical Data

  • 3600kgs Lifting Capacity

  • Fast Lifting & Lowering time

  • Minimum Height fully lowered 120mm

  • Maximum Lifting height 1850 mm

  • Platform Length 1500 to 1900 mm

  • Overall width 1900 mm

  • Power supply 3kw motor 400V 50Hz 3 phase

  • Single Phase Version available.

  • Concrete strength 35N/mm2 160mm thick

  • Continuous slab without cracks or joins

  • Options include hose extension kit

  • 12 months manufacturers warranty

This RECESSED IN FLOOR full height scissors lift is ideal for tyre shops, body shops and all workshops. It is very strong in construction and incorporates mechanical & hydralic safety devices. All pins and bushes are self lubricating. The platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during lifting & descending operations. The benefit of scissor lifts allow full access to sides, front and rear of the vehicle.

 View detailed catalogue

 Bradbury H8303 Wheel Alignment Lift

back to top 
Bradbury H8303 Wheel Alignment Lift

Long Platform Scissor in Platform Lift

  • Technical Data

  • Lifting Capacity 4500 kgs

  • Overall Platform length 5500mm

  • Lift & Lowering time 50 secs

  • Maximum Lifting height 2140mm

  • Maximum closed height 330mm

  • Dimensions of Built In platform

  • Overall platform length 1500 to 1940mm

  • Overall height of lifting table 565mm

  • Motor 3 kw 230/400V/50 Hz-3ph

  • Air Supply required 6-8 bar

  • Concrete 35N/mm2 strength 160 mm thick

  • Continuous slab without cracks or joins

  • Options available include

  • Jacking Beam Air or Hydraulic

  • Wheelplay Detectors

  • Extra Long run up ramps

  • 12 Months Manufacturers Warranty

This SURFACE MOUNTED full height scissors lift is ideal for tyre shops, body shops and all workshops. It is also the model to choose if you carry out wheel alignment. The main platform has another smaller length platform fitted inside allowing vehicles to be fully lifted quickly to make facilitate quick adjustments. Heavy Duty in construction incorporating mechanical & hydralic safety devices. All pins and bushes are self lubricating. The small hidden platform is extendable for long wheelbase vehicles and large saloons. This lift is extremely quiet and is fitted with an accoustic alarm during
descenT. The benefit of this lift is its diversity servicing, wheel alignment and all other operations are carried out simply and safely. This lift can be recessed into the floor if required.

 View detailed catalogue

 Bradbury H8203/ATL MOT Scissor Lift 5000mm long

back to top 
Bradbury H8203/ATL MOT Scissor Lift 5000mm long

Long Platform, full height VOSA approved

  • Technical Data

  • Lifting Capacity 5000kgs

  • Overall Platform length 5000mm

  • Lift & Lowering time 50 secs

  • Maximum Lifting height 2140mm

  • Maximum closed height 330mm

  • Motor 3 kw 230/400V/50 Hz-3ph

  • Air Supply required 6-8 bar

  • Concrete 35N/mm2 strength 160 mm thick

  • Continuous slab without cracks or joins

  • Options available include

  • Jacking Beam Air or Hydraulic

  • Wheelplay Detectors

  • Roller Bearing Turning Trays

  • 12 Months Manufacturers Warranty

This lift can be RECESSED or SURFACE MOUNTED to suit your MOT Bay. When ordered in MOT Specification it will include ball bearing turning trays, Wheelplay Detectors with handlamp and brake pedal depressor. If used in a workshop situation it can be bought without these items and as a standard flat platform. Heavy Duty in construction incorporating mechanical & hydralic safety devices. All pins and bushes are self lubricating.
This lift is extremely quiet and is fitted with an accoustic alarm during descent.

 View detailed catalogue

Prices change according to stock availability and exchange rates...
Please contact us and we'll find you the best deal currrently available!

If you don't see what you need, please don't hesitate to contact us - we can source a wide range of products, of which only a selection is shown here.

Ravaglioli LogoBradbury LogoDunlop LogoCrypton LogoDieseltune LogoAccutrack LogoRS Workshop Equipment LogoMajorLift Hydraulics LogoProsol LogoPremier Diagnostics Logo

Home | Two Post Lifts | Four Post Lifts | Scissor Lifts | Commercial Lifts | ATL/MOT Test Lanes | Brake Testers
Compressors | Wheel Balancers | Tyre Changers | Jacking Beams | Workshop Tools | Air-Con Service
Diagnostics | Motorcycle Equipment | Inspection Pits | HGV Test Lanes
Manufacturer's Approvals | Special Offers | Recent Installations | Contact Us