"The System makes the difference"
Consul Lifts have been manufactured in Germany since 1953.
They are of the highest quality and manufactured with exceptionally stiff rolled steel posts. This strong design offers a very small footprint to the post allowing wider spacing of the posts themselves hence making more room for opening the car doors.
All the lifts are all fitted with low-profile arms so there is no need for special adaptions for sports cars or cars with low sills etc. The unique design of the roller guided lift carriages means there are no guides to wear and the unique arm supports are exceptionally solid. Safety devices include automatic arm locks, a mechanical locking device in the event of load nut failure, acoustic foot protection and a chain break mechanism where appropriate.
Note the Base-frame : The steel supporting base-frame with chain cover has an extremely low drive-over height of only 34 mm.
This multi-purpose two post lift is your high quality, everyday two post lift. Full steel supporting base, chain drive with load nut and screw drive. Asymmetric in design "drive on reverse off" Lifting capacity of 3000kgs.
|Lifting height *||mm||1.975 (2.005 with pad screwed out)|
|Lifting-/ lowering time||s||approx. 45|
|Lowest pad height **||mm||85 (pad screwed in)|
|Arm extension range - front arms|
- rear arms
|430 - 880 (3 part)|
830 - 1.330 (2 part)
|Overall height to top of post||mm||2.565|
|Drive-through width between carriages|
Overall width when installed
|Clear distance between posts||mm||2.630|
|Base plate on floor (drive over height)||mm||34|
|Power||kW||1 x 3,0 motor|
|Power supply (elec.)||V/Hz||400 / 50|
|Fuse protection (elec.)||A slow-blow||16|
* Lifting height achieved with lifting pad fully open
** Lowest swivel-in heights reachable with optimal floor conditions
|Optional height spacers for lifting pads :|
Various heights available, ideal when lifting 4 x 4 vehicles or vehicles
with high ground clearance.
Part No 39734.9 - 35mm
Part No 56593.7 - 50mm
Part No 56594.5 - 100mm
Part No 56595.2 - 150mm
Part No 56596.0 - 200mm
|"Click here" to download brochure|