4000kgs two post lift. The Consul 2.40 Classic - Symmetric baseless


"The System makes the difference"

Consul Lifts have been manufactured in Germany since 1953.

They are of the highest quality and manufactured with exceptionally stiff rolled steel posts. This strong design offers a very small footprint to the post allowing wider spacing of the posts themselves hence making more room for opening the car doors.        

All the lifts are all fitted with low-profile arms so there is no need for special adaptions for sports cars or cars with low sills etc. The unique design of the roller guided lift carriages means there are no guides to wear and the unique arm supports are exceptionally solid. Safety devices include automatic arm locks, a mechanical locking device in the event of load nut failure, acoustic foot protection and a chain break mechanism where appropriate.

Note : No Base-frame : This lift has no supporting base-frame so no steelwork on the floor between the posts.


Product description : Model 54090.6

This multi-purpose two post lift is your everyday two post lift with the added bonus off being base-free. In addition this lift is fitted with four, three piece lifting arms giving the added bonus of the lift being used in both directions. Loved by main dealers and garages around the UK because of its diversity and the empty floor-space between the posts. Moving of toolboxes, transmission jacks and oil drainers etc; is a simple task.  The sychronisation system for the two drive motors can be by overhead bridge, or if preferred recessed into the concrete floor. Symmetrical model all 4 arms the same length) 

Lifting capacity of 4000kgs. 

Note : On this lift, the Cable Bridge for synchronisation 

can be installed above or below the concrete floor***

Design features:

  • Electronically synchronized columns made of special rolled profile
  • Columns turned by 30° (improved angle for door opening)
  • Short swivel arms movable from both sides
  • Bronze alloy load nut / cast alloy safety nut
  • Oil dispenser for supporting lubrication
  • Carriage equipped with 6 maintenance-free roller bearings
  • Broken nut raise lock-down feature
  • Covering of post interior
  • Acoustic foot protection
  • Cushioning door stop, adjustable pick-up plate (approx. 25 mm) 
  • Lockable operating device with reversing contactor
  • Automatic arm locking device with manual release function
  • Protection class IP 54, GS-approved, DIN EN 1493, CE-approved

Dimensions :



Specifications: 

Lifting Capacitykg4.000
A.  Lifting heightmm2.010*
B.  Overall height of post installed
Note : Overall height of overhead bridge
mm
mm
2.560
4.030
C.  Overall external width when installedmm3444
D.  Drive-through width between carriagesmm2390mm
Front arms are 3-piece as standard
E. Length of front arms closed
F. Length of front arms, fully extended
Rear arms are 2-piece as standard
G. Length of rear arms closed
H. Length of rear arms, fully extended
mm
mm

mm
mm
760
1460

760
1460
I.  Lowest pick up point heightmmapprox. 90 **
J.  Clear distance between upright columnsmmapprox. 2.650
Lifting / Lowering time(s)
Motor(s) fitted
secs
kW
approx. 50
2 x 2.5 kW motors
Power supply (elec.)V/Hz400V / 50Hz
Fuse protection (elec.)A slow-blow20 amps


  * Lifting heights only reachable with optional accessories

** Lowest swivel-in heights reachable with optimal floor conditions

*** If the cable bridge is fitted below floor, customer will be required to carry out civil works


Optional Lift Accessories :

Various lifting pad heights
Pt No : 37553.5 Spacer Holders
Optional height spacers for lifting pads :
Various heights available, ideal when lifting 4 x 4 vehicles or vehicles with high ground clearance.
Part No 39734.9 - 35mm
Part No 56593.7 - 
50mm
Part No 56594.5 - 
100mm
Part No 56596.0 - 200mm


        Optional Spacer holders : Part No 37553.5 -  1 Set = 4 pieces


        Part No 55378.4 Consul FixLift support, SURCHARGE                                                                                     1 set = 4 pieces, adjustable height range 80 - 245 mm                                                                                     Suitable for 2.30 Classic & Z230 Original.  


"Click here" to download brochure
Consul_230EL_Ltd_Clas_MGE.pdf