6500kgs two post lift. The Consul 2.65EL MultiXXL - Symmetric baseless


"The System makes the difference"

Consul Lifts have been manufactured in Germany since 1953.

They are of the highest quality and manufactured with exceptionally stiff rolled steel posts. This strong design offers a very small footprint to the post allowing wider spacing of the posts themselves hence making more room for opening the car doors.        

All the lifts are all fitted with low-profile arms so there is no need for special adaptions for sports cars or cars with low sills etc. The unique design of the roller guided lift carriages means there are no guides to wear and the unique arm supports are exceptionally solid. Safety devices include automatic arm locks, a mechanical locking device in the event of load nut failure, acoustic foot protection and a chain break mechanism where appropriate.

Note no Base-frame : This lift has no supporting base-frame so no steelwork on the floor between the posts.

Consul Premium Range

The Premium range is ideal for main dealers and prestige workshops offering a combination of flexibility, ease of use and ruggedness. The lifts have bronze load nuts with automatic oilers giving exceptional longevity, load nuts typically last over 15 years. The lifts have push button controls, programmable limits and microprocessor controlled levelling system. 

Product description : Model 51700.3

This 6500kgs capacity is amongst Consuls largest two post lifts. Quality of design and strength of construction it can lift 6500kgs with the greatest of ease. For customers working on heavy long wheelbase vans and tippers etc, this lift is a must.

This lifts is fitted with four three piece extending arms, braked motors and electronic levelling systems for maximum performance and safety. 

The sychronisation system for the two drive motors can be by overhead bridge, or if preferred recessed into the concrete floor. Symmetrical long 3-piece front and rear arms.

Lifting capacity of 6500kgs. 

Note : On this lift, the Cable Bridge for synchronisation 

can be installed above or below the concrete floor***

Design features:

  • Special rolled section columns
  • Installation rectangular to drive-on direction
  • Carriage guided by 6 rollers
  • Bronze load nut / cast alloy safety nut
  • Oil dispenser for supporting lubrication
  • Broken nut raise lock-down features
  • Acoustic foot protection
  • Softline push-button control with computer guided leveling system
  • Lockable main switch directly on the post
  • Complete covering of post interior
  • Cushioning door stop, adjustable pick-up plate (approx. 25 mm) 
  • Arm locking device (easily adjustable), locking at 300 mm
  • Optional: Self supporting base frame available.
  • Protection class IP 54, GS-approved, DIN EN 1493, CE-approved

Dimensions :


Specifications: 

Lifting Capacitykg6.500
A.  Lifting heightmm1.965*
B.  Overall height of post installed
Note : Overall height with overhead bridge
mm
mm
2.900
4.370
C.  Overall external width when installedmm3.600
D.  Drive-through width between carriagesmm2.360
This lift is fitted with 3-piece arms as standard
E. Length of front arms closed
F. Length of front arms, fully extended
G. Length of rear arms closed
H. Length of rear arms, fully extended

mm
mm
mm
mm

830
1.675
830
1.675
I.  Lowest pick up point heightmmapprox. 115 **
J.  Clear distance between upright columnsmmapprox. 2.730
Lifting / Lowering time(s)
Motor(s) fitted
secs
kW
approx. 45
2 x 5,0 motors
Power supply (elec.)V/Hz400 / 50Hz
Fuse protection (elec.)A slow-blow25 amps


  * Lifting heights only reachable with optional accessories

** Lowest swivel-in heights reachable with optimal floor conditions

*** If the cable bridge is fitted below floor, customer will be required to carry out civil works

Optional Lift Accessories :



Pt No : 37553.5 Spacer Holders
        Various lifting pad heights
Height spacers for lifting pads :
Various heights available, ideal when lifting 4 x 4 vehicles or vehicles with high ground clearance.
Part No 39734.9 - 35mm           Part No 56593.7 - 50mm
Part No 56594.5 - 
100mm        
Part No 56595.2 - 150mm
Part No 56596.0 - 200mm

       Spacer holders : Part No 37553.5 -  1 Set = 4 pieces


        Part No 55378.4 Consul FixLift support, SURCHARGE                                                                                       1 set = 4 pieces, adjustable height range 80 - 245 mm                                                                                       Suitable for 2.30 Classic & Z230 Original.  

        Part No 52060.1 Special pick-up adapter for Ford Transit for all 2-post lifts with a 
        capacity up to 4.000 kg. 
        (1 set contains: 4x adapters for Ford Transit, 4x spacers 60 mm). 
        Part No 52012.2  Special pick-up adapter for VW Amarok for all 2-post lifts with a
        capacity up to 4.000 kg. (1 set contains: 2x adapters front axle, 2x adapters rear axle). 
         Part No 52011.4   Special pick-up adapter for Sprinter/Crafter for lifting at point A and
         C according to the manufacturers guidelines. For all 2-post lifts with a capacity up to 
         4.000 kg. (1 set contains: 2 x adapters front axle, 2 x adapters rear axle). 
         Part No 56794.1    Special pick-up adapter for off-road MB for 2-post lifts with a
         capacity p to 4.000 kg. 1 set contains 4 x prism-adapters for off-road MB. 


"Click here" to download brochure
Consul_2-35_40_Premium_MGE.pdf