"Special Offer" CASCOS C3.2 with base, Two Post lift (3.2 tonnes capacity)


The origins of Cascos in the world of lifts date back to the 1960s.

In 1982 Cascos Maquinaria S.A. was founded, a leader in the Spanish market devoted to the design, manufacture and marketing of vehicle lifts. 

The factory is located in Vitoria (Basque Country), in the North of Spain, close to the border with France. It is an area with a significant industrial sector, which has led to multinationals from all over the world, such as Mercedes Benz, Michelin, etc., establishing themselves there due the high level of professionalism and quality.

In R&D, the experience accumulated during this time has made it possible for Cascos to collaborate with some of Europe's top automobile brands. Through this collaboration Cascos have achieved maximum innovations possible in the sector in our lifts.

An example of this is their trusted partnership with the top manufacturers at European level such as the Renault Group, the PSA Group (Peugeot-Citroen), Mercedes Benz, VW-Audi, Nissan, brands that have approved them as their preferred suppliers or often ask us to join them in R&D projects. Similarly, we collaborate with leading companies in automobile maintenance and revision, such as Midas, Feu-Vert and Speedy. We have even opened lines of supply with the United Nations and the armed forces of various countries.


The Cascos model C3.2 with base, two post vehicle lift can only be described as as a Classic. Dont think for a moment that it's old fashioned, think of it as the way lifts used to be made. Due to its traditional build quality these lifts can still be found in workshops everywhere, they just keep going, going and going!!!!!
Using a traditional electro-mechanical design, (a system of which the Chinese
have failed to copy) the Cascos C3.2 is as simple and uncomplicated as you can
get. It has been made in exactly the same way for decades and has only evolved in-line with the vehicles it needs to lift. Other than that, the principal and the build quality have remained the same since the day it was launched.
After all, why change what is already perfect?

Note the Base-frame : The steel supporting base-frame with chain cover has an extremely low drive-over height of only 48mm.



Note : As from March 2019 all Cascos lifts will be supplied in the

 new colour combination as shown below, Blue and Graphite Grey.


"Special Offer Price" of £ 3,195.00 + vat.

or lease / buy one for :
£15.00 + vat per week, (£65.00 + vat, per month) over 5 years
or
£23.50 + vat per week, (£101.84 + vat, per month)over 3 years 

(weekly figures quoted are subject to entering into an agreement with a 
finance company and are subject to status & finance company approval)
(Available in single phase version at extra cost)

**Delivered & installed to your premises.
(** excludes electrical connection)

24 Months manufacturers Warranty

"Limited Availability, so Order yours Now" 


Design features:

  • The "Slendertec" column (posts) are made from rolled solid steel profiles and not the folded sheets of steel like our competitors. Not only do they give 60% more strength they allow the posts to be much slimmer giving a maximum width between the posts of 2700mm.
  • A larger width between the upright posts enables the car doors to open wider.


  • Bi-directional Loading of Vehicle :
    Those strong "Slendertec" posts enable cars to be placed on the lift in either direction?     (Most two post lifts have short lifting arms to the front and long lifting arms to the rear to enable easier access to open the car door. When built this way the lift will have different weight limits depending on the cars position) Not a problem with the Cascos you can drive on or reverse on, still have enough room to open the doors and it doesn't matter which direction   the vehicle is facing. 


  • Fitted Double-height lifting Pads :
    Unlike almost every other brand of lift on the market, you are forced to purhase additional lifting pads for vehicles requiring additional reach. The C3.2 comes as standard with a unique "Double Height System" a telescopic screw within a screw allows you to double-up on the amount of adjustable travel.

  • Fitted Tool trays and door protection buffer :
    Comes complete with two tool trays for wheel nuts, bolts etc.
    Comes complete with rubber buffer, door protector.


Model shown is with low profile arms

  • Arm Safety Locks :
    Arm safety locks using spindle rod, give lifting arms more positioning posibilities under the car and enabling faster loading times. 


  •  Spindle Protection Covers :
    The columns/post are fitted with spindle protection covers ensuring the operator never gets dirty when touching a post.

Built using only the highest quality materials.


Dimensions : 

Lifting capacitykg3.200
Lifting height mm1.960  (2.100 with pad screwed out)
Lifting-/ lowering times45
Lowest pad height mm100 (pad screwed in)
Arm extension range - front / rear armsmm710 - 1050 (4 x 2 part arms)
Overall height to top of postmm2.435
Drive-through width between carriages
Overall width when installed
mm
mm
2.700
3.160
Clear distance between postsmm2.700
Base plate on floor (drive over height)mm48
PowerkW1 x 3,7 motor
Power supply (elec.)V/Hz400 / 50
Fuse protection (elec.)A slow-blow16


Manufacturer approvals and Collaborations include :


Back to Vehicle Lifts