Cascos C-450 Four Post Service Lift 5.000kgs lifting capacity - Cheapest Price


Cascos Lifts have been manufactured in Spain since 1965.

The owner then was Carlos Cascos who gained his technical expertise working in the local factories of Volkswagen and Mercedes.

The experience gained working at these factories encouraged the high quality German standards seen in the Cascos products of today.

All of Cascos four post lifts platforms are manufactured utilising the design of a steel lintel underneath with a one-piece platform on top.

This design is testament to the high quality and long term reliability of the Cascos four post lift and is the ultimate choice for you.

Certificated to the highest Standards



Cascos C-450 Model Four Post Lift.

The Cascos model C-450 is exactly the same as the C443 in build quality but has been fitted with longer platforms and heavier lifting capacity. 

This model is designed to have an extremely low drive-on height of 130mm 

In addition the C-450 has an extra wide 3.000mm drive through distance between the posts

However if the C-450 is not the size you require, the range includes models with longer platforms up to 7 metres and heavier lifting capacities up to 12000 kgs.


£6,500.00 + vat fitted.

Lease / Buy for £31.50 + vat per week, figures based over a 5 year period.

Product Description: 

The Cascos C-450 four post lift is a smooth platform service lift, surface mounted onto the workshop floor, with run up ramps to the front drive-on end and the operating post mounted on the front offside post. (drivers side front)

The C-450 is extremely compact in its overall dimensions and is suitable for lifting, servicing and repairing of passenger cars and long wheel-base vans.  


Design features:

  • Extra strength platforms with double "lintel style" beams.
  • Practically impossible to deform
  • Positively flat platforms
  • Double safety system, mechanical safety bar, pnuematic safety rack
  • Levelling alert light should the platforms go out of alignment
  • High quality guaranteed hydraulics, built at Cascos factory
  • Manual lowering valve in the event of power failure
  • Adjustable speed of lift for lighter loads
  • Flow regulation valve that achieves smooth operation regardless of weight
  • Thermal protection overload on drive motor
  • Safety system located on crossbars that will cut out in the event of cable breakage, cable slack, voltage drop, loss of power or underside obstruction.
  • ISO-9001 Quality Assurance Certification amongst others


Overall Dimensions & Specification.


Lifting Capacity
Lifting time loaded
kg
secs
5.000
40
Lifting height
Overall height to top of posts
Fully installed overall width
Fully installed overall length (includes drive-on platform)
mm
mm
mm
mm
2.000
2.410
3.410
6.731
Drive-on platform height, lift loweredmm130 
Platform width
Platform length
mm
mm
530
5.700
Distance between postsmm3.000
Adjustable internal platform distance
(adjustable track as standard)
mm684 - 1184
Power 3-phasekW3.0
Power supplyV/Hz400/50
Fuse protectionAmps16 - slow blow
Overall Weight when assembledkg1350

 

"Click here" to download brochure