Multitune offer a large selection of exhaust extraction systems suitable for your workshop.
As Regulations get stricter all the time, prevention of breathing exhaust fumes is a must.
The HSE has also recognised that mild steel welding fumes cause Cancer so welding areas and the fumes created will be in the frame for legislation.
The below Systems are just to give you an idea of whats available on the market.
PORTABLE EXTRACT SYSTEMS
The MGE-EX Kit 2 is a portable free standing fume extractor fitted with a 240v 0.75kW extraction fan providing an economical extraction solution across a wide range of vehicle types. The mobile exhaust extraction unit is ideal for single bay MOT stations where a fitted system may not be economically or physically practical.
Typical exhaust hoses diameters for these type of kits are 100mm, 125mm and 150mm.
The MGE-EX Kit 8 is a portable free standing fume extractor fitted with a 240v extraction fan providing an economical extraction solution across a wide range of vehicle types.
The mobile exhaust extraction unit is ideal for single bay MOT stations where a fitted system may not be economically or physically practical. These are ideally suited for twin (side by side) or awkwardly positioned exhausts. As standard these kits come with a 150mm diameter hose at 5 metres long, however longer lengths are available on request.
UNDERFLOOR EXTRACT SYSTEMS
Multitune Underfloor Systems – Plug in exhaust extraction systems are usually installed in new buildings only due to the extensive building works required.
The underfloor section comprises of plastic pipework below the concrete slab to leave exposed floor plates to the rear of the vehicle bays, a builder is required to install this. The floor plates come complete with suitable plugs attached to suitably sized hoses and nozzles. Typical exhaust hoses diameters for these type of systems are 100mm, 125mm and 150mm. These types of floor plates would be utilised in conjunction with an exhaust extraction fan to vent exhaust fumes to atmosphere.
Underfloor Pipe storage - The above system can also be used in conjuction with the Extraction Pipe Underfloor storage system. As the name suggests, the extraction pipes length is stored below ground giving larger coverage (more than one bay) and is stored out of site when not in use. Note : A builder is required to install this.
FIXED DROP SYSTEM
Multitunes fixed drop system - fixed drops are comprised of a vertical sections of ductwork connected to the main header duct terminating at approximately 1 metre from floor level.
For the majority of these systems suitably sized hoses and nozzles are attached directly to the bottom of the drops for connection to the vehicles. Typical exhaust hoses diameters for these type of systems are 100mm, 125mm and 150mm. These types of drops would be utilised in conjunction with one of our extraction fans to vent exhaust extraction fumes to atmosphere.
SLIDING RAIL EXTRACTION SYSTEM
Multitune Sliding Rail System - sliding rails exhaust extraction systems are normally used in long bays where traditional single points are not functional and extraction is required without having to connect and disconnect in different areas.
A moveable trolley slides within the rail section allowing extraction along the total length of the workshop or several bays where vehicles are left running.
SPRING RECOILED HOSE REEL SYSTEM
Multitunes Spring Recoiled Hose Reels - comprise of suitably sized exhaust hoses and nozzles manually wound onto a drum located above the work area.
These are the most popular type of vehicle exhaust extraction system.The reels are interconnected to suitably sized extraction fans to extract exhaust fumes to atmosphere.
Drum sizes are available in 650mm, 850mm & 1250mm wide. Exhaust hoses for these type of reels can be 75mm, 100mm, 125mm, 150mm and 200mm in diameter.
WELDING & FABRICATION
With the recent News from the HSE regarding mild steel welding and the links to Cancer its a certainty legislation regarding exposure to welding fumes will result.
Multitune - have a vast range of extraction solutions for the safe removal of welding fumes within welding & fabrication ares of the workshop.
For the HSE Report "Click Here"