AC Hydraulic FL2-M Twin Ram Heavy Duty Jacking Beam (air hydraulic)


The AC Hydraulic FL2-M is a Twin Ram Jacking Beam, is also exceptionally well manufactured but has the added bonus of Automatic Self Locking of the rams. Ideal when a vehicle is on the jack for long periods at a time, the ultimate in safety.

Can be made to fit lifts or inspection pits due to its adjustable frame.

This model is available in four different lifting capacities 6t, 12t, 16t & 20 tonnes 

The FL2-M enjoys the following specification : 

  • 2 individually controlled rams offer safe and balanced lifting
  • Transversely sliding rams
  • Rapid and precise air hydraulic unit with high speed ram travel
  • Simple modern design with control panel at ergonomical working height
  • Can be made to fit all lifts due to its adjustable frame
  • Frame height is adjusted and set to the customers individual specifications
  • Dead man’s release and safety overload valve for optimum safety
  • Supplied with 2 x 100mm extensions
  • When ordering fill out specification form






Technical data

 
FL60-2M
FL120-2M
FL160-2M
FL200-2M
Weight
202 kg
202 kg
202 kg
202 kg
Capacity
6 t
12 t
16 t
20 t
Stroke
200 mm
200 mm
200 mm
200 mm
Min. height
325 mm
325 mm
325 mm
325 mm
Max. height
505 mm
505 mm
505 mm
505 mm
Width¹
590-1410 mm
590-1410 mm
590-1410 mm
590-1410 mm
Depth
665 mm
665 mm
665 mm
665 mm
Lifting points²
200-1160 mm
200-1160 mm
200-1160 mm
200-1160 mm
Air supply
8-12 bar
8-12 bar
8-12 bar
8-12 bar
Air consumption
350 l/min
350 l/min
350 l/min
350 l/min


¹ Framewidth: 590-890 mm / 850-1150 mm / 1110-1410 mm

² Distance between lifting points: 200-640 mm / 200-990 mm / 200-1160 mm

* The capacity of the jacking beam cannot exceed 0,66 x the lift capacity

Selection of adaptors available, if required - see below :

Cross Beam Adaptors - T4-1 / T4-2 / T4-1W / T4-2W





Cross Beam Adaptors (T4-1 / T4-2 / T4-1W / T4-2W)
  • Capacity: 20 t
  • Ideal for supporting axle, whilst allowing work to be done on the differential gear
  • Offers increased safety – divides the load over 2 lifting points
  • Usable with various extensions and saddles: FG100, FG200, FW2, US
  • T4-1 / T4-2 - Length: 920 mm
  • T4-1W / T4-2W - Length: 1020 mm
  • T4-1 og T4-1W - increases min. height by 100 mm
  • T4-2 og T4-2W - increases min. height by 145 mm

Adjustable Width Cross Beam Adaptors - T5-1 & T5-2





Adjustable Width Cross Beam Adaptors - T5-1 & T5-2
  • Capacity: 15-11,5 t
  • Length: 1060-1635 mm
  • Ideal for supporting axle, whilst allowing work to be done on the differential gear
  • Offers increased safety – divides the load over 2 lifting points
  • Usable with various extensions and saddles: FG100, FG200, FW2, US
  • T5-1 increases min. height by 95 mm
  • T5-2 increases min. height by 140 mm

Innovative Cross Beam Adaptors - T6-1 & T6-2





Innovative Cross Beam Adaptors - T6-1 & T6-2

  • Capacity: 13 t
  • Hand wheel on the cross beam for easy and precise adjustment of lifting saddles without moving from the pit – ideal for inspection centres
  • Usable with various extensions and saddles: FG100, FG200, FW2, US
  • T6-1 / T6-2 - Length: 850-1350 mm
  • T6-1W / T6-2W - Length: 1120-1720 mm
  • T6-1 og T6-1W - increases min. height by 55 mm
  • T6-2 og T6-2W - increases min. height by 90 mm

LB - Diff Beam

Capacity: 20 t  


Allows use of both rams to lift at one point


FLTR Trolley



  • Practical trolley.                                                     Designed for mounting and dismounting of heavy duty jacking beams on lifts
  • Fitted with revolving wheels for easy manoeuvrability

"V" Saddle - FW2



"V" Saddle - FW2
  • Suitable for lifting under various axles

"US" Saddle - FW2



"U" Saddle - FW2
  • Suitable for lifting various chassis profiles

FG100 & FG200 Ram Extensions



  • FG100 - These ram extensions increases the lifting height by 100 mm
  • FG200 - These ram extensions increases the lifting height by 200 mm

Wall Brackets for tool mounting





VB-1 Robust wall bracket for storage of
extensions and saddles (4 pcs.)
VB-2 Robust wall bracket for storage of
extensions and saddles (8 pcs.)


Return to jacking beams