AC Hydraulics SD20L/SD26L Manually Operated Jacking Beams


The AC Hydraulic SD20L/SD26L model Jacking Beams, are exceptionally well manufactured in Denmark to the highest of standards and can be used on your inspection pit, four post lift or scissors lift due to the comprehensive range of support arms and adaptors.

They are hand operated and are suitable for cars and vans.

These jacking beams are available in two lifting capacities 2.0t & 2.6t 

They both enjoy the following specification : 

  • Quick and efficient lifting due to manual double acting pump
  • Low closed height of only 180 mm makes it suitable for vehicles with a low clearance
  • Flexible top support beam can be extended up to 1610 mm
  • Unique height adjustable support arm system – designed to fit all current lifts and pits
  • Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for optimum safety
  • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body
  • Please always state lift type to get the correct support arm. Should your lift not be in AC's support arm list then always fill in the specification form






Technical data

 
SD20L
SD26L
Weight (÷ support arms)
105 kg
105 kg
Capacity
2 t
2,6 t
Stroke
250 mm
250 mm
Min. height
180 mm
180 mm
Telescopic arms
780 - 1610 mm
780 - 1610 mm
Width (÷ support arms)
780 - 1180 mm
780 - 1180 mm
Lifting frame (height)
120 mm
120 mm
Lifting frame (depth)
250 mm
250 mm
Air supply
 
 
Air consumption
 
 

Selection of adaptors available, if required - see below :

Part No : 62 125 00  -  FSD1 Extension to increase the lifting height by 130 mm, (Order 2 units)




Part No : 02 989 00  -  FSD2 Rubber support block (40 mm) (Order 2 units)
Part No : 02 990 00  -  FSD3 Rubber support block (80 mm) (Order 2 units)

Blocks for protection of the underside of car body.




Part No : 62 237 00  -  FSD5 Saddle with spindle (106-240 mm) (Order 2 units)

  • Capacity: 2,0 t
  • Increases the lifting height by 106-235 mm.



Part No : 62 143 00  -  FSD6 Adjustable saddle increases lifting height by 32-92mm (Order 2 units)
Part No : 62 141 00  -  FSD7 Extension, to increase the lifting height by 60mm (Order 2 units)




Part No : 36 014 00  -  GS1 Rubber cushion for FSD6 (Order 2 units)




Part No : 62 172 00  -  GS2 Rubber cushion for 10 mm extension (Order 2 units)




Return to jacking beams