AC Hydraulics SD20PHL-A/SD26PHL-A "Automatic version" Jacking Beams


The AC Hydraulic SD20PHL-A/SD26PHL-A "Automatic model" Jacking Beams, are exceptionally well manufactured in Denmark to the highest of standards and can be used on your inspection pit, four post lift or scissors lift due to the comprehensive range of support arms and adaptors.

"Automatic model"  These units are fully Air hydraulic in operation, including the "in and out" movement of the lifting arms, a unique time saving feature for busy MOT Testing stations.

Both units are suitable for cars and vans and are two lifting capacities 2.0t & 2.6t 

They both enjoy the following specification : 

  • Individual joysticks control of lifting arms to avoid time consuming working operations
  • Remote control activates lowering and retraction of lifting arms to closed position
  • Placing the remote control next to the lift control panel ensures safe operation and prevents unnecessary steps
  • Unique height adjustable support arm system – designed to fit all current lifts and pits
  • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion
  • Please always state lift type to get the correct support arm. Should your lift not be in AC's support arm list then always fill in the specification form






Technical data

 
SD20PHL-A
SD26PHL-A
Weight (÷ support arms)
120 kg
120 kg
Capacity
2 t
2,6 t
Stroke
250 mm
250 mm
Min. height
200 mm
200 mm
Telescopic arms
780 - 1500 mm
780 - 1500 mm
Width (÷ support arms)
780 - 1180 mm
780 - 1180 mm
Lifting frame (height)
120 mm
120 mm
Lifting frame (depth)
250 mm
250 mm
Air supply
8,5 - 12 bar
8,5 - 12 bar
Air consumption
350 l/min
350 l/min

Selection of adaptors available, if required - see below :

Part No : 62 325 00  -  HSD Air-line connection kit for vehicle lift




Part No : 62 125 00  -  FSD1 Extension to increase the lifting height by 130 mm, (Order 2 units)




Part No : 02 989 00  -  FSD2 Rubber support block (40 mm) (Order 2 units)
Part No : 02 990 00  -  FSD3 Rubber support block (80 mm) (Order 2 units)

Blocks for protection of the underside of car body.




Part No : 62 237 00  -  FSD5 Saddle with spindle (106-240 mm) (Order 2 units)

  • Capacity: 2,0 t
  • Increases the lifting height by 106-235 mm.


Part No : 62 172 00  -  GS2 Rubber cushion for 10 mm extension (Order 2 units)




Return to jacking beams