AC Hydraulics SD20PHL/SD26PHL Air Hydraulic Jacking Beams


The AC Hydraulic SD20PHL/SD26PHL model Jacking Beams, are exceptionally well manufactured in Denmark to the highest of standards and can be used on your inspection pit, four post lift or scissors lift due to the comprehensive range of support arms and adaptors.

They are Air hydraulically operated and are suitable for cars and vans.

These jacking beams are available in two lifting capacities 2.0t & 2.6t 

They both enjoy the following specification : 

  • Quick and efficient lifting due to reliable and noiseless pump
  • Low closed height of only 180 mm makes it suitable for vehicles with a low clearance
  • Flexible top support beam can be extended up to 1610 mm
  • Unique height adjustable support arm system – designed to fit all current lifts and pits
  • Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for optimum safety
  • Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body
  • Please always state lift type to get the correct support arm. Should your lift not be in AC's support arm list then always fill in the specification form







Technical data

 
SD20PHL
SD26PHL
Weight (÷ support arms)
110 kg
110 kg
Capacity
2 t
2,6 t
Stroke
250 mm
250 mm
Min. height
180 mm
180 mm
Telescopic arms
780 - 1610 mm
780 - 1610 mm
Width (÷ support arms)
780 - 1180 mm
780 - 1180 mm
Lifting frame (height)
120 mm
120 mm
Lifting frame (depth)
250 mm
250 mm
Air supply
8,5 - 12 bar
8,5 - 12 bar
Air consumption
350 l/min
350 l/min


Selection of adaptors available, if required - see below :

Part No : 62 325 10  -  HSD-A Air-line connection kit




Part No : 62 125 00  -  FSD1 Extension to increase the lifting height by 130 mm, (Order 2 units)




Part No : 02 989 00  -  FSD2 Rubber support block (40 mm) (Order 2 units)
Part No : 02 990 00  -  FSD3 Rubber support block (80 mm) (Order 2 units)

Blocks for protection of the underside of car body.




Part No : 62 237 00  -  FSD5 Saddle with spindle (106-240 mm) (Order 2 units)

  • Capacity: 2,0 t
  • Increases the lifting height by 106-235 mm.



Part No : 62 172 00  -  GS2 Rubber cushion for 10 mm extension (Order 2 units)




Return to jacking beams