Majorlift MPJ6 Air Operated 6 tonne Jacking Beam


The Majorlift MPJ6 air operated Jacking Beam, is exceptionally well designed and manufactured in the UK. All Majorlift jacking beams are available to fit your inspection pit or vehicle lift or scissors lift due to the comprehensive range of support arms and adaptors.

Available only as air hydraulic and suitable for cars and vans.

This jacking beams has a lifting capacity of 6.0 tonnes

It enjoys the following specification : 

  • Top Beam –6.0 tonne model now with an extra-wide extending top beam to 1300mm.

  • Ram and Scissors – A full 200mm lift with proven hydraulics.

  • Safety Features – Hose burst and pressure release valves prevents overloading, finger guard complies with European machinery directive and CE marking.

  • Quiet Pump – New quiet design pump, built into every air jack.

  • Mechanical Lock – Engages automatically carrying out extensive wheel overhauls.

  • Raiser Blocks – Supplied as standard with each beam.                                                                     Rubber-topped screw pad 1532A, 1835 & 1836, see below.

  • Support Arms – Effortless operation from quality roller bearings give easy movement.

  • Roller Hook or Roller Flat Support Arms Supplied As Standard

Massive selection of support-arms to fit your specific lift or inspection pit, at extra cost (P.O.A).

See the range of support arms for your lift : 

2.0_2.8t_support_arms.pdf



"CLICK HERE" to see this beam in action

MPJ6 6-tonne air-operated.

Our 6 tonne unit has been a mainstay of our commercial range for some years. But with more and more garages now taking on work with smaller goods vehicles we’ve also included it in our lighter weight range.



Technical Data



RATED 6 TONNES
MOT Approval for

Part No. Manual
N/A
Part No. Air/Hydraulic
MPJ6
A Width when extended
1300mm – 51″
B Width when retracted
910mm – 35.8″
C Minimum width over support arms
920mm – 36.2″
D Maximum width over support arms
1290mm – 50.7″
E Closed height
320mm – 12.6″
F Total lift
200mm – 7.8″
*G Height above platform/floor
101mm – 3.9″
*can be set lower with special arms if required

Weight – with top beam
224kgs – 494lbs

Narrow Jacking Beams to fit narrow pits and lifts (pump mounted externally)

C Minimum width over support arms
N/A
D Maximum width over support arms
N/A
OPTIONAL EXTRA WIDE TOP BEAM

A Width when extended
N/A
B Width when retracted
N/A


RAISER BLOCKS
RATED 6 TONNES
Part No.

1532A
Standard
1835
Standard
1836
Standard
1532C
Optional
1532V
Optional


Return to jacking beams