In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
In 1ph and 3ph
Two Post Lift 5.0 tonnes ATLAS
The ATLAS range of lifts has been introduced into Europe, they are a familiar and reassuring sight in the United States since 1982. The Americans championed electro-hydraulic lifts so you can rest assured when you buy this 5 tonne capacity model you've bought rugged and reliable build quality with a great price tag.
£5970.00
- Brand: ATLAS
- SKU: ATP 10
- Shipping:
Product Description
Our Pricing of this product.
Hydraulic two post lift, available in 1 phase or 3 phase supply.
ATLAS ATP10, Two Post Lift, 5.0 tonne £4,975.00 + vat (£5,970.00 inc)
Note :
Our Price includes a free set of lifting extensions.
** Delivery & Installation at your companies "prepared site" and 20% vat.
(A VAT Invoice will be issued with your purchase)
** Delivery & installation :
A site survey will be completed prior to installation.
Customer to supply electrical supply & connection to lift.
Some of the Scottish Highlands & Islands may incur extra delivery costs,
if you are located in these regions, please ring before you buy.
NOTE OUR PRICING PROMISE BELOW.
 |  |
The model ATP 10 is the European larger version lift from ATLAS with 5000kgs lifting capacity, automatic electronic safety system during the lifting and lowering process. This heavy duty lift is also symmetrical in its arm configuration (all four arms are the same length), but factor in they are all three stage arms, you can configure this lift to work as a traditional asymmetrical lift. Fitted with four longer three stage arms giving that extra flexibility to lift vans and longer wheelbase vehicles. It doesn't stop there, look at the low pick-up point of the arms (110mm) and the distance between the posts (3000mm) this lift will be an asset in any workshop.
No Cost to you : Currently supplied in 3 phase or 1 phase and with two sets of commercial lifting adaptors (70mm and 100mm) at no additional cost to you.
Note : If you need to lift less weight, check out our 4000kgs model the ATLAS ATP 9.
Supplied in the New colour combination of Blue and Grey from November 2019.
Will it fit in my Workshop?
Please Note : This lift does not have a full metal base, the lift posts will be fitted direct into your concrete floor and will require a good quality of concrete.
Technical Details :
| Lifting capacity | kg | 5.000 |
| Lifting height | mm | 1.910 - 1975 |
| Lifting-/ lowering time | secs | 40 |
| Lowest pad height | mm | 110 (pad screwed in) |
| Arm extension range Front Arms (closed/open) Rear Arms (closed/open) | Symmetric mm mm | 4 x 3 stage arms 865 - 1700 865 - 1700 |
| Overall height to top of post | mm | 2.850 |
| Clear distance between posts Drive-through width between carriages Overall width when installed | mm mm mm | 3.000 2.616 3.620 |
| Cable cover floor plate (drive over height) | mm | 28 |
| Power | kW | 1 x 2,2 motor |
| Power supply (elec.) | V/Hz | 230 or 400v 50Hz |
| Fuse protection (elec.) 3ph / 1ph | A slow-blow | 16 / 30 |
Pricing Promise :
We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go.
Please Note : All Pricing on our Website includes 20% vat.
