The Cascos C5XL Syncro two post vehicle lift is referred to as "the beast". It has a massive 5000kgs lifting capacity, is fully baseless and boasts a 3000mm drive through width between the posts. If that isn't enough, its fitted with four three-stage lifting arms, which when fully closed are only 855mm long but fully open they extend to 1810mm. When you have these proportions in a lift you can pick up armoured cars, all vans from the shortest to the longest and all types of other vehicles. If you are buying this lift the lowest pick-up point of the lifting pads is 145mm it really is a lift designed to lift all vans and 4 x 4's and light commercials. Built to the same high quality standards of all the Cascos lifts and found in workshops everywhere, they just keep going, going and going which is what you want when buying a lift! Using a traditional electro-mechanical design, (a system of which the Chinese have failed to copy) the Cascos C5XL Syncro is simple and uncomplicated and has been made in exactly the same way for decades only evolving in-line with the vehicles it needs to lift. This model is fully baseless so there's nothing on the floor between the posts, a small overhead tubular gantry for the motor speed synchronising cables and reliable PCL controlled electronics. Another bonus, dont forget, Cascos lifts are reversible so you can drive-on or reverse-on without compromising the lifting capacity. Extremely quiet in operation, a thoroughly reliable uncomplicated two post lift with quality not seen on the market today. An excellent product with an excellent reference as these lifts are used by Mercedes Benz in their own production facility. Included as standard : • Tool Trays on arms • Double height lifting pads • Rubber protections on columns for safe door opening • Arm safety locks, via spindle rod, offering more positioning possibilities under the vehicle • Spindle protection to avoid the operator getting dirty when touching the post. Note : This vehicle lift is available only in three-phase supply. Supplied in New colour combination, Blue and Grey from November 2019. **Delivered and installed at your premises with a full 24 months Parts and Labour warranty. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Please Note Pricing : CASCOS C5XL Syncro Two Post Lift Cash Price £9,515.00 + vat (£11,418.00) Lease purchase prices can be arranged, subject to Finance Company Approval.

  • Brand: Cascos
  • SKU: C5XL Syncro
  • Shipping:  

Product Description

Will it fit in my Workshop :

All CASCOS Lifts are manufacture to the highest Quality Standards and include :

"SlenderTec" profile posts, specially designed and hot-rolled, to enable building of lifts with narrow posts that are more resistant to torsion and flex than other lifts that are made with folded sheet metal or similar materials.

SlenderTec technology makes the posts impossible to deform they will always look like they did on the day they were installed.

Bi-directional Loading of Vehicle (with or without base) :
"Slendertec" posts enable cars to be placed on the lift in either direction?  (Most two post lifts have short lifting arms to the front and long lifting arms to the rear to enable easier access to open the car door. When built this way the lift will have different weight limits depending on the cars position) Not a problem with the Cascos you can drive on or reverse on, still have enough room to open the doors and it doesn't matter which direction the vehicle is facing.  

  • Fitted Double-height lifting Pads :
    Unlike almost every other brand of lift on the market, you are forced to purchase additional lifting pads for vehicles requiring additional reach. The Cascos lifts come as standard with a unique "Double Height System" a telescopic screw within a screw allows you to double-up on the amount of adjustable travel.

  • Arm shown above is low profile.
  • Fitted two tool trays for wheel nuts, bolts etc.
  • Comes complete with rubber buffer, door protector.
  • Protection of the spindle thread, prevents user from getting dirty by touching it.

Arm Safety Locks :
Arm safety locks using spindle rod, give lifting arms more positioning possibilities under the car and enabling faster loading times.

Electro-mechanical with a 45mm spindle : 

The diameter of the spindle used on Cascos lifts is 45 mm, the largest on the market. By using this large spindle size it creates less friction and, therefore, less wear to the "nut to spindle" assembly.

Cascos spindles are cold-rolled and not thread cut, this process accredits to the lifts high quality and extended life offered by other manufacturers. 

The spindles are fully checked individually prior to any assembly commencing.

Built using only the highest quality materials.

 European regulation EN 1493:2010 and the directive 2006/42/EC

All Cascos lifts exceed the standardisation requirements in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of a lift.

All Cascos lifts include an identifier of the valid  EC declaration of conformity, that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.