Majorlift VTJ2000 Vertical Transmission Jacks (manual or air-hydraulic models) - Copy


2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity
2000kg Capacity

The Majorlift VTJ2000 series of vertical transmission jacks can be purchased as a floor standing unit, for use under a vehicle lift, mobile columns or within an inspection pit. There are 4 models available all with 2000kgs capacity. (If you prefer a smaller lifting capacity several more units are available on this website) Two models for use under a four post lift or mobile columns : 1. VTJ2000 Mobile model, manually operated, pumped by hand. 2. VTJ2000A Mobile model, air hydraulically operated by push/pull lever. Two models for use within an Inspection Pit : 3. VTJ2000P (P for Pit version) mobile, manually operated, pumped by hand. 4. VTJ2000PA (PA for Pit version, with Air Operation) mobile with push/pull lever. Note : Versions with "A" are Air Operated, will require a compressed air supply. All of the above units can be safely used and operated by one mechanic, and are all very flexible when used under a vehicle. With a closed minimum height of 1155mm and fully extendable to an unusually high height of 2100mm. When these units reach full height they will remain stable due to a wide four legged base frame fitted with four heavy duty swivel wheels, two of which are lockable. There is a large range of adaptor plates including a universal one or a selection for lifting manufacturers particular gearboxes, there is also an adaptor plate that will allow lifting assistance with heavy hubs. (see full range of adaptor plates below) Optional Accessories include : Large selection of Adaptor Plates. Note : This product includes delivery, to your premises within the UK. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Please Note Pricing : All Purchase Prices quoted include 20% vat. A full VAT Invoice supplied with all purchases. Special Offer Price VTJ2000 £2187.50 + vat (£2625.00 inclusive)


£2625 £3330(-21.17%)

Purchase your transmission jack now :: *

Product Description


To see the unit in action "click on the photo below.

Vertical Transmission Jacks Standard Features

Two way tilt adaptor – The lifting adaptor can easily be adjusted into a precise  position when removing most types of transmission.

Triple extension ram with chrome piston – Provides up to 945mm of stroke.

Manual hydraulic double acting power pack – Proven on other Majorlift equipment, this allows units of up to 2000kg to be removed with a smooth, safe and highly controllable application of power.

  • Load test certificate – supplied with each unit.
  • CE markings – conform to EC directives.
  • Capacity 2000kg.


Standard Adaptor 9510 (supplied with transmission Jack)


Optional Transmission Jack Adaptor Plates

Manoeuvering heavy gearboxes and transmissions is difficult, time consuming and potentially hazardous. This unique range of drive-line adaptor plates for transmission jacks are the perfect solution. They let you work swiftly, safely and precisely, preventing the perennial problems of alignment. Each plate is custom-designed to provide the perfect fit for the transmission you are working on. No more fudging with pieces of wood; no compromises on safety. Crucially by using a bespoke transmission plate the time will be significantly reduced that it takes you to disconnect, remove and then reposition transmissions.


9612 Universal Adaptor Plate


This Universal Adaptor Plate can readily be adjusted to provide precise positioning for a wide range of vehicles. Infinite adjustability is provided by moveable length and width settings. The unit can be accurately positioned and secured for most applications. Robustly constructed with a weight-bearing capacity of 2000kg, this unit can safely handle heavy vehicle gear boxes and differentials AS SHOWN.


Large range of various adaptors.
Majorlift offer adaptor plates for different makes such as DAFs, Landrover, Shoguns, Voith, Scania, Volvo, ZFs these can usually be offered straight out of stock.

95249517

9524 – Brake drum hub adaptor.
9524A – converts 9612 to 9524

9517 – Volvo FM7/FM12 adaptor.
9517A – converts 9612 to 9517
95139521

9513 – DAF 75/85, Rigid vehicle
(avoids removal of X member)
9521 – ZF. Eco lite/mid/split adaptor
95229523
9522 – Shogun adaptor
9523 – Scania universal adaptor pre 2007.
9523A – converts 9612 to 9523
95169514

9516 – Voith and ZF auto bus adaptor

9514 – Land Rover Defender adaptor
95259526

9525 – Scania GRS 905 gearbox adaptor.
9525A – converts 9612 to 9525

9526 – B12M Volvo Coach, ZF & retarder.
9526A – converts 9612 to 9526


Custom-designed
If you want a new plate designed and made for your specific application then Majorlift will create one for you rapidly, harnessing their CAD / CAM facilities.

Warranty Term 5 Years
Majorlift offer a 5 Year Warranty Term. There is a provision that the prescribed maintenance schedule must have been carried out. All maintenance must be recorded in order to support any claim if necessary. 


Brochure